设为首页 | 加入收藏 | 联系我们   
|||||||
  产品列表
  工业热电偶及校验仪系列
  工业热电阻、热电偶
  压力表及压力校验仪系列
  双金属温度计
  SWP昌晖仪表选型
  SWP昌晖压力/液位/变送器
  温度变送器
  智能显示仪表
  磁翻板/浮球/液位计/流量计
  电气装备用电缆
  电力电缆
  桥架系列
  特种电缆
  电量变送器
  智能电力监测仪
  管件与阀门
  高/低压配电柜
  高低压母线
  SWP昌晖数字显示调节仪
  氧化锆探头及氧量分析仪
  控制模块CPA101-220
  射频导纳物位计
  PH电极,工业在线PH计
  差压/压力变送器选型
  WP信号隔离转换器/安全栅
  补偿导线
  HXWP晖祥仪表选型
  辰竹仪表产品选型
  功率变送器
  流量计系列
  双室平衡容器
  CHNJ系列隔离器/安全栅/配电器
  资质文件
  NHR HR虹润仪表
  LU安东仪表
  安徽天康仪表
  泰华仪表
  DY2000东辉仪表
  WP上润仪表
  无线数传模块
  联系方式
南京昌晖自动化仪表有限公司
电  话: 025-57155258
传  真: 025-57155258
地  址: 南京市六合区雄州南路399#(恒利园区)
邮  箱: njchyb@189.cn
网  址: http://www.chnj.net
  站内搜索
关键字:
范 围:
首页产品展示PH电极,工业在线PH计  
 
名称:F615-B160-DH,130,210系列发酵电极
询价:025-57155258 点此订购留言
厂商:美国
放大图片 放大图片

产品名称: F615-B160
产品型号: F615-B160
产品展商:
南京昌晖自动化仪表有限公司(中国地区总代理商)
简单介绍
美国broadleyjames F615电极 FermProbe® PH Electrodes: T-Pull® and Standard Electrode Styles Specifications Ordering Information The T-Pull® and standard style FermProbe  PH  electrodes are designed to be used in bioprocess applications where CIP/SIP procedures are used. Built to withstand repeated steam sterilization cycles, the FermProbe quickly stabilizes after steam exposure to be back on-line in half the time of other electrodes. This rugged, low impedance, process  PH  electrode continues to provide fast and precise  PH  measurements even after harsh use and prolonged steam exposure. The FermProbe design specifies that the  PH  electrode be secured to the housing by a free-spinning threaded retainer nut. This allows the electrode to be installed or removed from the housing without twisting or disconnecting the electrode cable. T-Pull® Handle FermProbe  PH  Electrodes The T-Pull handle eases installation and removal of the electrode from the housing. The electrode can be easily removed from the housing without being rotated or twisting the cable. This greatly reduces cable fatigue. Features: Rugged handle design eases removal of electrode from housing. No tools required. Greatly reduces cable fatigue. Electrode retainer nut is part of the handle. Cannot be lost or misplaced. Available with disconnect cap or integral cable. Model F-615 Model F-607 Standard FermProbe  PH  Electrodes This FermProbe style is designed for economy while still retaining all performance specifications. This electrode is secured into the housing with a reusable electrode retainer nut. All housings are shipped with a reusable electrode retainer nut to be used with this style of FermProbe. Features: Most economical, cost effective design. Secures to housing with reusable retainer nut. Rubber strain relief minimizes cable fatigue. Available only with integral cable. Model F-600 How to Order an Electrode (1) Choose Electrode Model. If the electrode needs a disconnect cap, use Model F-615. If the electrode needs an integral cable for extra protection in a washdown area, use Model F-607 or F-600. (2) Choose Electrode Length. If you have already chosen a housing, select an electrode length with the same Class designation as the housing. The housing ordering information box also lists the correct electrode length to order. If you have not already chosen the housing, please review the recommendations next to each electrode model below. (3) Confirm Cable Length and Connector. Model F-615  PH  electrodes require a disconnect cable and connector assembly. Model F-600 and F-607  PH  electrodes come with 6 ft (2 m) cable and BNC connector. If you need a different cable length or connector, please call the Sales Department for more information. SPECIFICATIONS FermProbe  PH  Electrode Specifications: 0 - 13  PH range Steam sterilizable to 135° C 150 psig max. pressure Double junction, Ag-AgCl reference system Electrode secures to housing with threaded retainer nut Ordering Information Call 1-800-288-2833 For Price & Delivery Electrode Model Class Use with these Housing Models Electrode Length Cable Length Connector Electrode Part Number Model F-615  PH  FermProbe with T-Pull Handle & Disconnect Cap F-615 A 320, 330, 326,336, 350, 357, 370 130 mm Order Separately F-615-B130-DH F-615 B 320, 330 160 mm F-615-B160-DH F-615 C 320, 330 210 mm F-615-B210-DH Model F-607  PH  FermProbe with T-Pull Handle & Integral Cable F-607 A 320, 330, 326,336, 350, 357, 370 130 mm 6 ft (2m) BNC F-607-B130-M06BC F-607 B 320, 330 160 mm 6 ft (2m) BNC F-607-B160-M06BC F-607 C 320, 330 210 mm 6 ft (2m) BNC F-607-B210-M06BC Model F-600 PH FermProbe with Integral Cable F-600 A 320, 330, 326,336, 350, 357, 370 130 mm 6 ft (2m) BNC F-600-B130-A06BC F-600 B 320, 330 160 mm 6 ft (2m) BNC F-600-B160-A06BC F-600 C 320, 330 210 mm 6 ft (2m) BNC F-600-B210-A06BC Home | Products | FAQs | Documents | Tech Support | Contact | Search USA and Canada: Broadley-James Corp. Toll-Free (800) 288-2833 Copyright © 2006 Broadley-James Corporation. All Rights Reserved. Trademarks

美国broadleyjames F615发酵电极的详细介绍

美国broadleyjames F615发酵电极

The T-Pull® and standard style FermProbe PH electrodes are designed to be used in bioprocess applications where CIP/SIP procedures are used. Built to withstand repeated steam sterilization cycles, the FermProbe quickly stabilizes after steam exposure to be back on-line in half the time of other electrodes. This rugged, low impedance, processPHelectrode continues to provide fast and precise PH measurements even after harsh use and prolonged steam exposure.

The FermProbe design specifies that the PH electrode be secured to the housing by a free-spinning threaded retainer nut. This allows the electrode to be installed or removed from the housing without twisting or disconnecting the electrode cable.

T-Pull® Handle FermProbe PH Electrodes
The T-Pull handle eases installation and removal of the electrode from the housing. The electrode can be easily removed from the housing without being rotated or twisting the cable. This greatly reduces cable fatigue.
Features:
Rugged handle design eases removal of electrode from housing. No tools required.
Greatly reduces cable fatigue.
Electrode retainer nut is part of the handle. Cannot be lost or misplaced.
Available with disconnect cap or integral cable.

Model F-615

Model F-607

Standard FermProbe PH Electrodes
This FermProbe style is designed for economy while still retaining all performance specifications. This electrode is secured into the housing with a reusable electrode retainer nut. All housings are shipped with a reusable electrode retainer nut to be used with this style of FermProbe.

Features:
Most economical, cost effective design.
Secures to housing with reusable retainer nut.
Rubber strain relief minimizes cable fatigue.
Available only with integral cable.

 

Model F-600

How to Order an Electrode

(1) Choose Electrode Model.
If the electrode needs a disconnect cap, use Model F-615. If the electrode needs an integral cable for extra protection in a washdown area, use Model F-607 or F-600.

(2) Choose Electrode Length.
If you have already chosen a housing, select an electrode length with the same Class designation as the housing. The housing ordering information box also lists the correct electrode length to order. If you have not already chosen the housing, please review the recommendations next to each electrode model below.

(3) Confirm Cable Length and Connector.
Model F-615 PH electrodes require a disconnect cable and connector assembly.

Model F-600 and F-607 PH electrodes come with 6 ft (2 m) cable and BNC connector. If you need a different cable length or connector, please call the Sales Department for more information.

SPECIFICATIONS

FermProbe PH Electrode Specifications:
0 - 13 PH range
Steam sterilizable to 135° C
150 psig max. pressure
Double junction, Ag-AgCl reference system
Electrode secures to housing with threaded retainer nut

 

 

Ordering Information

Call 1-800-288-2833 For Price & Delivery

Electrode Model

Class

Use with these Housing Models

Electrode Length

Cable Length

Connector

Electrode Part Number

Model F-615 PH FermProbe with T-Pull Handle & Disconnect Cap

F-615

A

320, 330, 326,336, 350, 357, 370

130 mm

Order Separately

F-615-B130-DH

F-615

B

320, 330

160 mm

F-615-B160-DH

F-615

C

320, 330

210 mm

F-615-B210-DH

Model F-607 PH FermProbe with T-Pull Handle & Integral Cable

F-607

A

320, 330, 326,336, 350, 357, 370

130 mm

6 ft (2m)

BNC

F-607-B130-M06BC

F-607

B

320, 330

160 mm

6 ft (2m)

BNC

F-607-B160-M06BC

F-607

C

320, 330

210 mm

6 ft (2m)

BNC

F-607-B210-M06BC

Model F-600 PH FermProbe with Integral Cable

F-600

A

320, 330, 326,336, 350, 357, 370

130 mm

6 ft (2m)

BNC

F-600-B130-A06BC

F-600

B

320, 330

160 mm

6 ft (2m)

BNC

F-600-B160-A06BC

F-600

C

320, 330

210 mm

6 ft (2m)

BNC

F-600-B210-A06BC

点击次数:4882
 
中国联采招标网
香港上润仪表
福建东辉仪表总代
新浪网
东辉仪表
南京昌晖自动化
香港昌晖总代理
百度
   南京昌晖自动化仪表有限公司版权所有 Copyright◎1998-2024 All Rights Reserved   技术支持:******商品交易网
  地址: 南京市六合区雄州南路399#(恒利园区)  电话: 025-57155258   传真: 025-57155258   E-mail: njchyb@189.cn 苏ICP备11070889号-4
  • QQ咨询

  • QQ交谈
  • QQ交谈